Passive Radiator Pad – Multi-band nextG/3G/4G
$54.00
Passive Radiator Pad, Passive Repeaters, repeater, booster
In stock
Description
8dbi – Passive Radiator Pad
698-960/1710-2690MHz
Covers all 4G & 3G Bands Worldwide | |
|
|
Connectivity | Benefits
| - 3G & 4G Mobile Phones.
- Multi Band: 4G 3G GSM
- Covers all 3G and 4G bands worldwide.
- Lay the Passive Pad on your desktop and place up to 3 phones on top to couple the antenna signal to your phone.
- Note: Coupling efficiency may vary between phone models, connected band and placement position.
| - Desktop pad to place your mobile phone on
- Improves your 3G or 4G mobile phones reception and wireless broadband speed when used with a high-gain external Yagi antenna system.
- Tether your Mobile Phone as a Local Wireless Hotspot.
- Use your mobile phones Bluetooth to connect to Mobile-Link and Link2Mobile Handsets.
| Passive Pad system to work, some conditions need to be met:
• Current signal at the repeated area must be 0-1 bars.
• Cable runs: >5m require LMR240 and >10m require LMR400 coax.
• Generally, a high gain Yagi antenna of 16dBi depending on available signal.. | | Minimum Requirements for Effective Passive Pad operation: In areas of poor outdoor signal, 1-2 bars:
• Cable runs: require super-low-loss LMR400 coax.
• A high gain Yagi antenna of 15dBi or more In areas of medium-high outdoor signal, 3 bars or more:
• Cable runs: >5m require LMR240, >10m require LMR400
• A high gain antenna of at least 13dBi depending on available signal. |
|
|
|
 |  Desktop Passive Pad | |
| |  Other connection options are available with optional adapters.Pictured left is the SMA female adapter. |  | |  The FME male option has an FME male to SMA female adapter included, as shown at left.
|
| | Electrical Data | 4G version | 3G Version | | Frequency: | 698-806/806-960/1710-2700 MHz | 806-960/1710-2690 MHz | | Gain: | 6/7/8 dBi | 7/8 dBi | | VSWR: | <1.5:1 | <1.5:1 | | Polarization: | Vertical | | Horizontal Beamwidth: | 90° | 90° | | Vertical Beamwidth: | 55° | 55° | | Nominal Impedance: | 50 Ohms | | F/B Ratio: | >10 dB | | Max Input Power: | 100 W | | Lightning Protection: | DC Ground | | Mechanical Data | | | | Connector: | SMA male | | Dimensions: | 206*177*46mm | | Weight: | 0.6kg | | Cable Length: | 1.5m | 300mm | | Reflector Material: | Aluminum Alloy | | Antenna Material: | Weatherproof ABS | | Mounting Method: | Desktop with Rubber feet attached | | Mast Diameter: | n/a | | Rated Wind Velocity: | n/a | | Operating temperature: | -40~+65°C | | Type: | Multi-band Panel |
|
|
|
698-960/1710-2700MHz Compatible
Final Signal Gain Calculator
Other connection options are available with optional adapters.
The FME male option has an FME male to SMA female adapter included, as shown at left.
LL240 – SMA female to SMA female – Low Loss Coax Cable