Description
16dBi 850/900MHz Yagi Antenna (Directional)
for
Telstra 3G, Optus 3G, Vodafone 3G/4G+
Mobile Phone and Mobile Broadband Internet | To find your closest Cell Tower frequency click here |
|
|
|
Connectivity | Benefits – Who uses these antennas. | | - 3G USB Modems, Routers and 3G Mobile Phones.
- Rural/Regional services.
- 3G 850MHz & 900MHz Mobile Phones and Mobile Broadband Access.
- 4G 850MHz as used by Vodafone.
- GSM mobile phones
- Remote, 3G IP Cameras surveillance and control.
- For Fixed Wireless, Outdoor and Semi-Mobile installs.
- RFID and 900MHz wireless links
| - Greatly Improves Wireless Internet and Mobile Phone service in rural and marginal signal areas.
- Mines, Dongas and Geo-technical contractors.
- Locations in hills country where local 3G signal is week due to terrain.
- Farms and Stations too far from Mobile phone towers.
- Correctly installed, this antenna may turn an unreliable 3G internet connection into a fast broadband and quality VoIP service.
| |
|
|
 | Supplied with FME-Female and SMA-Male (adapter) final connection.
Patch Lead (if required) not included sold separately |
|
Cables & Connections
The antennas have SMA male connector. 
The optional additional coax cable is supplied with adapter(s)
|
 | LL240 and LL400 – SMA female both ends |
| + |  |  | LL240 and LL400
SMA female on coax,
SMA male + FME female adapters included | LL195
FME female on cable, SMA male adapter included |
|
Antenna Coax Cable
• Select your required length of
LL195, LL240 or LL400 low-loss coax cable.
• Connects Antenna to Wallplate or direct to your modem/Patch Cable.
Coax specs | | SMA-Male and FME-female Final Termination
*When antenna is purchased with an Optional Coax
• Selected Coax Cables are supplied with adapters to provide final terminations of both SMA Male and FME female via included adapter(s).Others available |
Coax Cable includes a strip of Self Amalgamating Tape to seal the outdoor antenna connection. | | - Seal antenna connections against Rain, Moisture and UV sunlight.
- 19 wide x 0.8mm thick.
- Sufficient tape to cover the outdoor SMA antenna connections in the kit.
| |
Phone/Modem Patch Cable not included – Please purchase separately Mast shown in pictures is for illustration purposes only.
Mast or pole not included |
850 900 MHz Compatible
Carrier/Service | Band | Mode | Bandwidth | Compatible? |
|
Telstra/Bigpond nextG | 850MHz | 3G WCDMA | 824~894 MHz |  | Vodafone 3G, 3G+ | HSPA,DC-HSPA+ |  | Vodafone 4G 850 | 4G |  |
|
Optus, Virgin, Vodafone
3G (900MHz) | 900MHz | UMTS/HSPA 900 | 880~960 MHz |  |
|
Telstra 4G Advanced 900MHz | 900MHz | 4G LTE-A | 880~960 MHz |  |
|
Telstra Vodafone & Optus – 4G | 1800MHz | LTE 1800 FD | 1710~1880 MHz | no |
|
Vodafone, Optus, Telstra
GSM/3G – voice/sms/data | 2100MHz | UMTS/HSPA | 1920~2170 MHz | no |
|
*Services are being continuously updated – subject to change.
Specifications
Electrical Data | 850MHz Band | 900MHz Band |
Frequency(MHz): | 824-890 | 880-960 |
Gain: | 15dBi | 16dBi |
VSWR: | <1.5:1 | <1.2:1 |
Polarization: | Vertical, Horizontal (±45° Slant with optional bracket) |
Horizontal Beamwidth: | 31° | 30° |
Vertical Beamwidth: | 28° | 27° |
Nominal Impedance: | 50 Ohms |
F/B Ratio: | >18 dB |
Lightning Protection: | DC Ground |
Mechanical Data | |
Pigtail / Connector: | 300mm LMR240 / SMA- male |
Dimensions: | 1410 x 200 x 50 mm |
Weight: | 1.2kg |
Pigtail Cable Length: | 300mm |
Reflector Material: | Aluminum Alloy |
Antenna Material: | Aluminum Alloy |
Mounting Method: | Mast |
Mast Diameter: | Ø40-Ø70mm U-Bolt Clamp |
Rated Wind Velocity: | 210km/h |
Operating temperature: | -40~+65°C |
Type: | Directional, Yagi-Uda |