11dBi nextG 3G 4G 4GX All Band LPDA Antenna
$97.90 inc. GST
11dBi 700-2700MHz 3G nextG 4G Radome Antenna
Description
11dbi – 700-2700MHz LPDA Directional Antenna
All Band – All Carriers
4GX, 4G, 3G, nextG & GSM
700/850/900/1800/2300/2600
inc 2.4GHz WiFi
Mobile Broadband and Mobile Phone | |
|
|
Connectivity | Benefits – Who uses these antennas. | - 3G, 3G+ nextG & GSM USB Modems, Routers
& Mobile Phones. - All 4G 700,850,900,1800,2300 & 2600MHz bands including 4GX and 4G CA.
- Future proof, covers all services:
- Rural/Regional/Metro services using the band specified.
- For Fixed Wireless, Outdoor and Indoor installations.
| - Greatly Improves Wireless Internet and Mobile Phone service in rural and marginal signal areas.
- Mines, Dongas and Geo-technical contractors.
- Locations in hills country where local 3G signal is weak.
- Farms and Stations and anyone just outside of the stated coverage area from the Mobile phone towers.
- Correctly installed, this antenna may turn an unreliable 3G internet connection into a fast broadband and quality VoIP service.
|
|
|
 | Optional coax cable is supplied with FME-Female and SMA-Male (adaptor) final connection.
Patch Lead (if required) not included sold separately | |
| SPECIFICATIONS |
Electrical Data | | | Gain: | 10/11 dBi | | Frequency (MHz) | 698-960 /
1710-2700 | | VSWR: | <1.2:1 | | Polarization: | Vertical, Horizontal | | Horizontal Beamwidth: | 50° | | Vertical Beamwidth: | 40° | | Nominal Impedance: | 50 Ohms | | F/B Ratio: | >18 dB | | Max Input Power: | 100 W | | Lightning Protection: | DC Ground |
Mechanical Data | | | Connector: | SMA Male on antenna | | Dimensions (mm): | 445*265*65 | | Weight: | 1.2kg | | Pigtail Cable Length: | 300mm | | Pigtail Coax: | ®LMR200 or equiv. | | Element Material: | Aluminum Alloy | | Radome Material: | Weatherproof ABS | | Mounting Method: | Mast | | Mast Diameter: | Ø25-Ø54mm | | Rated Wind Velocity: | 240km/h | | Operating Temp: | -40~+65°C | | Type: | Radome Log-Periodic (LPDA) |
|
| | Can be installed as a MiMo Antenna Kit
|  | Vodafone 4G
Telstra 4GX and 4G
Optus 4G MIMO
Optus 4G-TDD-2300 MIMO
Wireless-N MIMO.Also useful for 3G Antenna Diversity in low signal areas. |
| | |
|
|
|
698-960/1710-2700MHz Compatible
Cables & Connections
| The antennas have SMA male connector. 
The optional additional coax cable is supplied with adapter(s)
|
 | | LL240 and LL400 – SMA female both ends |
| + |  |  | LL240 and LL400
SMA female on coax,
SMA male + FME female adapters included | LL195
FME female on cable, SMA male adapter included |
|
Antenna Coax Cable
• Select your required length of
LL195, LL240 or LL400 low-loss coax cable ABOVE.
• Connects Antenna to Wallplate or direct to your modem/Patch Cable.
Coax specs | | SMA-Male and FME-female Final Termination
*When antenna is purchased with an Optional Coax
• Selected Coax Cables are supplied with adapters to provide final terminations of both SMA Male and FME female via included adapter(s).Others available |
Coax Cable includes a strip of Self Amalgamating Tape to seal the outdoor antenna connection. | | - Seal antenna connections against Rain, Moisture and UV sunlight.
- 19 wide x 0.8mm thick.
- Sufficient tape to cover the outdoor SMA antenna connections in the kit.
| |
| Phone/Modem Patch Cable not included – Please purchase separately Mast shown in pictures is for illustration purposes only.
Mast or pole not included |
Best Coax Cable for 4G LTE
 | | Consider using super-low-loss LMR400 coax for 4G LTELMR240 & LMR195 coax are very high quality coax cables. However there are no magical loss-free coax cables and as such are subject to attenuation that increases with increased frequency and longer length as any coax cable.
As the upper 4G bands of 1710MHz – 2700MHz the attenuation per metre will be more than double that of the lower 700, 850 and 900MHz bands.
Thus we always recommend LMR400 super-low-loss coax for runs more than 5m for frequencies over 1GHz in low signal areas. |
