Description
20dbi – Parabolic Grid Antenna for
4G-LTE 1800 MHz – Mobile Broadband | NOTE !! 4G LTE 1800MHz only – NOT suitable for 3G or nextG
|
|
|
|
|
| Connectivity | Benefits – Who uses these antennas. | - USB 4G Routers, Modems and Mobile Phones.
- GSM services on 1800MHz
- For Fixed Wireless, Outdoor and Semi-Mobile installs.
- Suitable for both 4G LTE-FDD 1800 as used by Vodafone Telstra and Optus.
| - Homes, Offices, Mines, Dongas and Geo-technical contractors, but rural and metropolitan.
- Farms and Stations too far from Mobile phone towers.
- Correctly installed, this antenna may turn an unreliable 4G internet connection into a fast broadband and quality VoIP service.
- Greatly Improves 4G Wireless Internet and Mobile Phone service in rural and marginal signal areas.
| | This antenna suits 4G LTE services on 1800MHz. At this frequency, like the 2100 GSM/3G band, much signal can be absorbed by rain, fog, and vegetation that is in the direct line from the tower to your location. Also, the signal path needs to be line-of-sight. This doesn’t mean you need to be able to see the cell tower, it just means there must be no significant buildings, hills or mountains blocking the direct path. To get the best LTE connectivity you’ll benefit form the greatly increased Signal Strength and Signal-to-Noise ratio these directional antennas will provide. |
|
|
 | |  | | When purchased with coax cable, final connection is
SMA male + FME female to suit all Patch cables and most modems
Patch Lead (if required) is not included, sold separately | | Supplied with FME-Female and SMA-Male (adapter) final connection.
Patch Lead (if required) not included sold separately |
| Electrical Data | | | Frequency: | 1710-1880 MHz | | Gain: | 20 dBi | | VSWR: | <1.5:1 | | Polarization: | Vertical, Horizontal, ±45° Slant | | Horizontal Beamwidth: | 12° | | Vertical Beamwidth: | 18° | | Nominal Impedance: | 50 Ohms | | F/B Ratio: | >30 dB | | Max Input Power: | 100 W | | Lightning Protection: | DC Ground |
Mechanical Data | | | Connector: | SMA Male | | Dimensions: | 1000 x 600 x 480 mm | | Weight: | 2.5kg | | Cable Length: | 240mm | | Reflector Material: | Aluminum Alloy | | Antenna Material: | Aluminum Alloy | | Mounting Method: | Mast | | Mast Diameter: | Ø40-Ø70mm | | Rated Wind Velocity: | 210km/h | | Operating temperature: | -40~+65°C | | Type: | Parabolic Grid |
| | | |  | Also available as a Dual Antenna Kit for
Optus, Vodafone & Telstra 4G LTE 1800 MIMO |
|
| | |
|
Cables & Connections
1800 MHz Compatible
| Carrier/Service | Band | Mode | Bandwidth | Compatible? |
|
| Telstra/Bigpond nextG | 850MHz | 3G WCDMA | 824~894 MHz | no | | Vodafone 3G, 3G+ | HSPA, HSPA+ |
|
Optus, Virgin, Vodafone
3G (900MHz) | 900MHz | UMTS/HSPA 900 | 880~960 MHz | no |
|
| Telstra – 4G LTE – Advanced | 900 plus 1800MHz | 4G LTE-A
Dual Band | 880~960 MHz +
1710~1880 MHz | no |
|
| Telstra Vodafone & OPTUS – 4G LTE | 1800MHz | LTE 1800 FD | 1710~1880 MHz |  |
|
Vodafone, Optus, Telstra
GSM/3G – voice/sms/data | 2100MHz | UMTS/HSPA | 1920~2170 MHz | no |
|
*Services are being continuously updated – subject to change.
