Description
LL400 Antenna Coax Cable Description
(CLF400, KSR400,®LMR400) Super Low Loss 50? Double Shielded 10.3mm
Best suited to Fixed-Wireless installations such as Office buildings and Homes.
Larger than ®LMR240 but lower loss and more rigid.
Super Low Loss LL400 Coax is made to length and is available with various connector options. Adapters also available.
Double shielded by one layer of Aluminium foil and one close-knit copper braid make for a low-loss coax with 10.3mm overall diameter.
Its low signal attenuation figures make it well suited for use at Cell Phone frequencies.
LL400 – Signal Loss – 10m cable length
Frequency (MHz): 850 900 1800 2100 2400(WiFi)
Attenuation (dB): 1.25 1.28 1.93 2.0 2.2
Outer Diameter: 10.3mm Impedance: 50?
Inner Conductor: 2.74mm Solid Copper or Cu over Al
Outer Sheild: Bonded Aluminum Foil + Tinned Copper Braid
Dielectric: Physical Foam Polyethylene
There are many suppliers that manufacture coax cables to the ®LMR series specification.
Some suppliers cut corners, producing sub-standard coax which does not conform.
Our High Quality Coax
Fully Tinned Copper Outer Braid
* Resist corrosion and electrolysis
Strong mechanical connection
Lower loss over long lengths
Greater than 90% Braid Coverage
Lower signal loss
Bonded Foil Second Shield
Consistent Impedance
Correct Inner & Outer Conductor Diameter
Correct impedance.
Foam Polyethylene/Air Dielectric
Cheap Poor Quality Coax
Cheap Poor Quality Coax
Bare Copper Outer Braid
No Corrosion resistance
Weak mechanical connection
Less than 75% Braid Coverage
Signal loss by radiation
Loose Foil Second Shield
Inconsistent Impedance
Undersized Inner & Outer Conductor Diameter
Loose fit to crimp connectors
Poor impedance match
Solid Polyethylene Dielectric
Higher signal loss
Features
Adapters/Connectors
