LL400 Antenna Coax Cable
(CLF400, KSR400,®LMR400) Super Low Loss – 50Ω Double Shielded 10.3mm
Best suited to Fixed-Wireless installations such as Office buildings and Homes.
Larger than ®LMR240 but lower loss and more rigid.
Super Low Loss LL400 Coax is made to length and is available with various connector options. Adapters also available.
Double shielded by one layer of Aluminium foil and one close-knit copper braid make for a low-loss coax with 10.3mm overall diameter.
Its low signal attenuation figures make it well suited for use at Cell Phone frequencies.
| LL400 – Signal Loss – 10m cable length | | Frequency (MHz): | | 850 | 900 | 1800 | 2100 | 2400 (WiFi) | | Attenuation (dB): | | 1.25 | 1.28 | 1.93 | 2.0 | 2.2 |
|
| Outer Diameter: | | 10.3mm Impedance: 50Ω |
| Inner Conductor: | | 2.74mm Solid Copper or Cu over Al |
| Outer Sheild: | | Bonded Aluminum Foil + Tinned Copper Braid |
| Dielectric: | | Physical Foam Polyethylene |
| |
There are many suppliers that manufacture coax cables to the ®LMR series specification.
Some suppliers cut corners, producing sub-standard coax which does not conform. |
Our High Quality Coax
|  
|
| Fully Tinned Copper Outer Braid
– Resist corrosion and electrolysis
– Strong mechanical connection
– Lower loss over long lengths | Greater than 90% Braid Coverage
– Lower signal loss | Bonded Foil Second Shield
– Consistent Impedance | Correct Inner & Outer Conductor Diameter
– Correct impedance. | | Foam Polyethylene/Air Dielectric |
|
|
|
Cheap Poor Quality Coax
|  
|
| Bare Copper Outer Braid
– No Corrosion resistance
– Weak mechanical connection | Less than 75% Braid Coverage
– Signal loss by radiation | Loose Foil Second Shield
– Inconsistent Impedance | Undersized Inner & Outer Conductor Diameter
– Loose fit to crimp connectors
– Poor impedance match | Solid Polyethylene Dielectric
– Higher signal loss |
|
|
|
 ®LMR is a registered trademark of Times Mircowave Systems USA |
|
Spec sheet (KSR400_wbs.pdf, 531 Kb) [Download]
LMR400
