LL400 Coax Cable – Made to order

Description

LL400 Antenna Coax Cable
(CLF400, KSR400,®LMR400) Super Low Loss – 50Ω Double Shielded 10.3mm

Best suited to Fixed-Wireless installations such as Office buildings and Homes.
Larger than ®LMR240 but lower loss and more rigid.

Super Low Loss LL400 Coax is made to length and is available with various connector options. Adapters also available.
Double shielded by one layer of Aluminium foil and one close-knit copper braid make for a low-loss coax with 10.3mm overall diameter.
Its low signal attenuation figures make it well suited for use at Cell Phone frequencies.

There are many suppliers that manufacture coax cables to the ®LMR series specification. Some suppliers cut corners, producing sub-standard coax which does not conform.

Our High Quality Coax   Fully Tinned Copper Outer Braid – Resist corrosion and electrolysis – Strong mechanical connection – Lower loss over long lengths Greater than 90% Braid Coverage – Lower signal loss Bonded Foil Second Shield – Consistent Impedance Correct Inner & Outer Conductor Diameter – Correct impedance. Foam Polyethylene/Air Dielectric

Cheap Poor Quality Coax   Bare Copper Outer Braid – No Corrosion resistance – Weak mechanical connection Less than 75% Braid Coverage – Signal loss by radiation Loose Foil Second Shield – Inconsistent Impedance Undersized Inner & Outer Conductor Diameter – Loose fit to crimp connectors – Poor impedance match Solid Polyethylene Dielectric – Higher signal loss

®LMR is a registered trademark of Times Mircowave Systems USA